Skip to content

All jobs

Embedded Firmware Engineer - Humanoid (human)

NEURA Robotics

  • Zürich, CH
  • Posted Nov 17, 2026
  • Embedded engineer
  • Jobrona can apply for you

About the job

YOUR MISSION & CHALLENGES Our system runs high-density sensing and actuation at 1 kHz. Your firmware will keep the system stable, safe, and responsive. You will own the embedded software on the central ARM controller and the distributed motor controllers, implementing high-rate FOC, safety limits, and communication with the ROS 2 stack. You will work closely with electronics, mechatronics, and controls engineers to turn the architecture into a robust, testable embedded system. - Implement and tune FOC / current, velocity, and position loops on ARM Cortex-M33 class motor controllers at ≥1 kHz. - Develop FreeRTOS-based firmware on a high-performance ARM Cortex-M7 central controller: - Motor network supervision (CAN-FD/SPI/RS485). - Sensor fusion for encoders, force sensing, ToF, IMUs, and tactile arrays. - Safety monitoring, watchdogs, and power-loss handling. - Integrate with micro-ROS / DDS-XRCE to expose the system as a single logical node to the main robot controller. - Implement calibration procedures, configuration management, and firmware update mechanisms. - Design and run unit/integration tests for control and safety logic; support HIL / bench testing. - Work tightly with controls/AI engineers on interfaces, timing budgets, and observability. WHAT WE CAN LOOK FORWARD TO - 4+ years in embedded firmware for real-time systems (robotics, motion control, automotive, industrial). - Fluency in C / C++ for microcontrollers and RTOS environments (FreeRTOS or similar). - Practical experience with BLDC motor control, FOC, and real-time control loops. - Experience with one or more of: CAN-FD, SPI, RS485, Ethernet in real-time systems. - Comfortable reading schematics, understanding power and sensing hardware, and debugging at the HW/SW boundary. - Strong focus on safety, reliability, and deterministic behaviour. - Experience with ARM Cortex-M7/M85 platforms and dual-core debugging. micro-ROS / ROS 2 integration experience. - Prior work on servo drives or complex articulated robotic systems. - Familiarity with control theory (impedance control, observers, state estimation).

Not just this job

With the same CV, Jobrona finds jobs like this one and applies to them for you.